
Jeroen Smits
Specialist Data Acquisition
This transmitter measures the ambient temperature with a built-in PT100 sensor.
The FT10-RT433-IS is a wireless temperature transmitter with internal PT100 sensor. Ideally for quick temperature measurements in the environment and originally developed for regular calibration demands in storage rooms, cold rooms and freezers. Easy to connect to your own Ovaport web service for monitoring all temperature measurements.
The FT10-RT433-IS transmitter consists of a radio part (the antenna) and a measuring module, connect a PT100 sensor to create temperature measurements. The measurement part can be recalibrated or exchanged with a fresh recalibrated one without significant break in the measurement. These wireless instruments communicate with each other via a MHz signal. The battery-powered 10 MW transmitters have a range in open space of several kilometres and the practical range indoors is approximately 30 to 300 meters (depending on the amount of steel and glass in a building). The modulation technique tolerates other traffic on the same band very well.
Please note, the FT10 product series from Nokeval has now been replaced by the Flex product series (FT10-series is however still available). These are comparable in terms of technology, construction of the transmitter and components. However, the Flex transmitters communicate wirelessly with each other via LoRa (stands for: Long Range signal), this is wireless communication with noise suppression/cancelling. The FT10 series communicates at 433,92 MHz without noise reduction and therefore the practical range distances are a little shorter.
Technical specifications
Type: internal PT100 sensor
Accuracy: < 0,5°C
Input channels: 1
Measuring range: -30...+60°C
Transmission interval: 5 s... 5 min
Coverage range: open space up to 300 meters
Output channels: 1
Outputs: 433 MHz radio signal
Programming: MekuWin or 6790
Supply voltage: battery: 1.5 V AA alkaline
Battery life: over 3 years (80 seconds transmission interval)
Sensor type: internal Pt100
Maximum ambient temperature: 60°C
Minimum ambient temperature: -30 °C
Case material: plastic (PC and ABS+PC)
Protection class: IP66
Approvals: CE and EN13485
Nokeval – Ovaport monitoring system webinar, especially for the food industry and laboratories.
Data acquisition
Data acquisition
Data acquisition
Any questions or would you like to receive a quote? Let us know by filling out the form below and our sales team will get in touch.
This website uses modern techniques that are not supported by your web browser. Update my web browser